Knights Electrocom

A  Wall Bracket supplied complete with two 1.5" U-Bolts.

Available in 6", 9" and 12" arm lengths.  Please note this is measured to the end of the bracket, so the pole will be about 2" closer to the wall than this.

The height of the brackets are 6" for the 6" & 9" arms, and 12" for the 12" arms.

We also now have a 9" x 9" bracket available.

A pair of Wall Brackets supplied complete with two 2" U-Bolts.

Available in 12", 18", or 24".  Please note this is measured to the end of the bracket, so the pole will be about 3" closer to the wall than this.

A lightweight pole and bracket, ideal for mounting small base antennas to a wall or facia or even in the loft.

We have 2 versions available, one with a smaller pole and one a larger:

Small:  Pole stands approx 13" from wall and is approx  8" high. Diameter 1".

Large:  Pole stands approx 9" from wall and is approx 30" high. Diameter 1".

These are only suitable for small antennas (probably up to 9ft) and will not be strong enough for larger base antennas.

Standard lashing kit, as used on TV aerials.

Light duty, pressed steel bracket plus lashing kit.

You may need to 2 of these if you are erecting a large CB antenna, or alternatively use one of the heavy duty double lashing kits.

A heavy duty welded lashing kit, consisting of a 6" bracket, lashing wire and u-bolts.

• 6" welded bracket
• Lashing wire
• 2 x 1.5" U-bolts
• 3 x corner plates
• 2 x J-bolts

A heavy duty "cradle" style chimney lashing kit.

• 13.5" welded bracket
• Lashing wire
• 2 x 2.5" U-bolts
• 3 x corner plates
• 2 x J-bolts

A repair kit for chimney lashing kits, consisting of:

• Lashing wire
• 3 x chimney corner brackets
• 2 x U-bolts
• 2 x J-bolts

Replacement U Bolts for use on brackets and antennas.

The standard 1.5" and 2" are the ones supplied with out brackets.  The "antenna" u-bolts are the slimmer type 1.5" ones which come with the standard British made base antennas (and many other antennas).

These steel poles are tapered at one end and are interlocking so that you can join several together.

The aluminium poles listed later are not interlocking.

Note: poles can only be sent by carrier, not normal post, so the carriage will be £7.95 whether you order 1 pole or 10 !!

A straight 1.25" diameter steel pole - not tapered at one end.

These steel poles are not interlocking.

Note: poles can only be sent by carrier, not normal post, so the carriage will be £7.95 whether you order 1 pole or 10 !!

We stock both 6ft and 10ft alloy poles, but unfortunately only the 6ft can be supplied mail-order, the 10ft poles (which are 1.5" diameter) must be collected.

These aluminium poles are not interlocking.

Note: poles can only be sent by carrier, not normal post, so the carriage will be £7.95 whether you order 1 pole or 10 !!

A 5ft alluminium pole, which is tapered at one end, so that they can be slotted together.

Note: poles can only be sent by carrier, not normal post, so the carriage will be £7.95 whether you order 1 pole or 10 !!

A new style heavy duty interlocking steel pole, available in 5ft lengths.

The ends are tapered and "clover leaf" shaped allowing you to securely slot 2 or more poles together to give a longer mast. The shape of the interlocking ends means that the poles will not rotate and are a good tight fit.

Galvanised finish.

A light-weight alloy pole designed for TV aerials and other light antennas.

These are only 1" diameter rather than 1.25" like the ones above.

Staight 5 foot pole (not interlocking).

A set of 4 interlocking aluminium poles, which slot together to give you a maximum length of 20ft.

These are available in a choice of 4 diameters - obviously the larger the diameter the stronger the mast will be.

I would recommend that all masts over 15ft should be guyed.

A standard antenna rotator complete with control box.

Although this will turn up to 50kg it is not the weight that will damage the rotator but the wind force on it.  Customers have certainly used these on 3-element beams, but I think a 4-element is getting too large for it.

• Lightweight rotator system
• Auto control unit 177 x 152 x 64mm
• Rotator is 101 x 228 x 101mm
• 220V AC operation
• Includes all mounting clamps and hardware.

The AR-35X rotator is ideal for light to medium loads such as small beams, loop antennas or TV aerials.

Support bearing for use with a standard rotator.

This allows you to mount the rotator at the base of the mast rather than at the top and then add a second support mast.

A clamp for joining 2 poles up to 2" in diameter.  Will clamp down to any smaller size.

You will usually require 2 of these, spaced a reasonable distance appart.

A clamp for joining 2 poles up to 2" in diameter.  Will clamp down to any smaller size.

Because of the design of this bracket you can use it to join 2 poles either in parallel or at right angles to each other (ie to add a cross-bar etc). 

When used as a right angle joiner, the maximum diameter of the second pole is 1.5".

A genuine bracket from Sirio designed to allow you to mount the Sirio 827 and Sirio Starduster M400 onto any size pole from 1.25" to 2" diameter.

Normally these antenna sit "on top" of the mounting pole, which must be 35-40mm to fit correctly, this adaptor consists of a short length of the correct size poles connected to a bracket with u-bolts.

Similar to "rawl bolts" but much cheaper.

Requires a 10mm masonary drill.

A 4ft copper plated earth rod complete with clamp for attaching an earth wire.

A good earth connection can not only help reduce interference but can also improve performance of your station.

A guy rope clamp to fit 1.25" or 1.5" poles.

Hooks for 3 guy wires.

A guy rope clamp to fit 1.25" or 1.5" poles.

Hooks for 4 guy wires.

A metal joing sleeve to join 2 poles together.

Available for 1.25", 1.5" and 2" poles.